Reheat Furnace Refractories - Resco Products

Reheat Furnaces

A reheating furnace's main function is to reheat semi-finished steel to 1100°F - 1250°F. The steel will then be shaped in the hot rolling mill. Resco's products are key in improving and maintaining the efficiency of reheating furnaces.

Reheat Furnace Part - Resco productsResco Products will recommend the most suitable product to meet your quality standards. Resco provides a full range of refractory products designed to withstand abrasive solids, gases at high temperatures, and prevent heat loss.

Common Resco products utilized in a reheat furnace consist of QuikTurn 60G, Kricon 32-70, & Alumex P-85-HS.

RELATED PRODUCTS
Wet Mortar

Adacor 70 DipArrow icon

ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 70 TR-D3.5Arrow icon

ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 80 DipArrow icon

ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 80 TR-D3.5Arrow icon

ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Dry Mortar

Adamant Air Set-DryArrow icon

A dry, air-setting fireclay - silica based mortar, with a maximum service temperature of 3000°F, used for bonding super duty brick. Just add water to obtain the desired trowel or dipping consistency. This product will take an air set, but does not develop its full joint strength until after heating to 220°F (105°C)
PDS SDS
A dry, air-setting fireclay - silica based mortar, with a maximum service temperature of 3000°F, used for bonding super duty brick. Just add water to obtain the desired trowel or dipping consistency. This product will take an air set, but does not develop its full joint strength until after heating to 220°F (105°C)
Wet Mortar

Adamant X GreenArrow icon

ADAMANT X is a fireclay-silica based material with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time. ADAMANT X is the original wet air setting cement for bonding intermediate, high heat and super duty fireclay brick. Produced since 1907, ADAMANT X was one of the first bonding mortars introduced to industry that truly bonded brick together. Through the years, the ADAMANT X trademark has stood for quality and has been widely accepted by refractory consumers.
PDS SDS
ADAMANT X is a fireclay-silica based material with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time. ADAMANT X is the original wet air setting cement for bonding intermediate, high heat and super duty fireclay brick. Produced since 1907, ADAMANT X was one of the first bonding mortars introduced to industry that truly bonded brick together. Through the years, the ADAMANT X trademark has stood for quality and has been widely accepted by refractory consumers.
Wet Mortar

Adamant X YellowArrow icon

ADAMANT X is a fireclay-silica based material with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time. ADAMANT X is the original wet air setting cement for bonding intermediate, high heat and super duty fireclay brick. Produced since 1907, ADAMANT X was one of the first bonding mortars introduced to industry that truly bonded brick together. Through the years, the ADAMANT X trademark has stood for quality and has been widely accepted by refractory consumers.
PDS SDS
ADAMANT X is a fireclay-silica based material with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time. ADAMANT X is the original wet air setting cement for bonding intermediate, high heat and super duty fireclay brick. Produced since 1907, ADAMANT X was one of the first bonding mortars introduced to industry that truly bonded brick together. Through the years, the ADAMANT X trademark has stood for quality and has been widely accepted by refractory consumers.
Alumina Brick

Alumex P-85-HSArrow icon

ALUMEX® P-85 HS exhibits a combination of very high strengths, high abrasion resistance, and excellent thermal shock resistance. Its high purity composition yields a refractory product that can withstand severe alkali attack.
PDS SDS
ALUMEX® P-85 HS exhibits a combination of very high strengths, high abrasion resistance, and excellent thermal shock resistance. Its high purity composition yields a refractory product that can withstand severe alkali attack.
Dry Mortar

AlutabArrow icon

ALUTAB® is a high purity, 85% alumina mortar compatible with 70%, 80%, and 90% alumina brick. It is designed for use under the most severe conditions where high refractoriness, good bond strength, and resistance to attack by molten metal and slag are the prime requirements. It is air-setting with a 3400°F service temperature limit.
PDS SDS
ALUTAB® is a high purity, 85% alumina mortar compatible with 70%, 80%, and 90% alumina brick. It is designed for use under the most severe conditions where high refractoriness, good bond strength, and resistance to attack by molten metal and slag are the prime requirements. It is air-setting with a 3400°F service temperature limit.
Coatings

Blox StixArrow icon

BLOX STIX is a fibrous adhesive used to adhere block insulation to steel or other substrates. BLOX STIX aids the installation of mineral fiber, calcium, silicate and vermiculite based block insulation.
PDS SDS
BLOX STIX is a fibrous adhesive used to adhere block insulation to steel or other substrates. BLOX STIX aids the installation of mineral fiber, calcium, silicate and vermiculite based block insulation.
Shotcrete Activator

EZ AddArrow icon

SDS
Low Cement Castable

EZ Cubed 60MArrow icon

Mullite-based/ self flow/pumpable/shotcrete/low cement castable
PDS SDS
Mullite-based/ self flow/pumpable/shotcrete/low cement castable
Low Cement Castable

EZ Cubed 60M XTArrow icon

Mullite-based/ self flow/pumpable/shotcrete/low cement castable
PDS SDS
Mullite-based/ self flow/pumpable/shotcrete/low cement castable
Low Cement Castable

EZ Cubed 70PCArrow icon

EZ CUBED® 70PC is a Low Cement, 70% Alumina castable that can be installed by vibration cast, pumping or shotcreting methods.
PDS SDS
EZ CUBED® 70PC is a Low Cement, 70% Alumina castable that can be installed by vibration cast, pumping or shotcreting methods.
Low Cement Castable

EZ Cubed 80-15Arrow icon

EZ CUBED® 80-15 is a Low Cement, 80% Alumina castable containing a silicon carbide addition that can be installed by vibration cast, self-flowing, pumping or shotcreting methods.
PDS SDS
EZ CUBED® 80-15 is a Low Cement, 80% Alumina castable containing a silicon carbide addition that can be installed by vibration cast, self-flowing, pumping or shotcreting methods.
Chemically Bonded Castables

EZ EST 32-70 PCArrow icon

EZ EST 32-70 PC is a colloidal-silica bonded, pumpable castable. This product is engineered for short turnaround after placement. The colloidal silica binder must be added as a separate component.
PDS SDS
EZ EST 32-70 PC is a colloidal-silica bonded, pumpable castable. This product is engineered for short turnaround after placement. The colloidal silica binder must be added as a separate component.
Chemically Bonded Castables

EZ EST 60GArrow icon

EZ EST 60G is a cement-free, 60% alumina gun mix that can be installed by conventional gunning methods. This product requires an additional liquid binder, called EZ ADD binder, for installation. EZ ADD binder is added at the gunning nozzle during installation
PDS SDS
EZ EST 60G is a cement-free, 60% alumina gun mix that can be installed by conventional gunning methods. This product requires an additional liquid binder, called EZ ADD binder, for installation. EZ ADD binder is added at the gunning nozzle during installation
Chemically Bonded Castables

EZ EST 60PCArrow icon

EZ EST 60PC is a cement-free, 60% alumina castable that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation
PDS SDS
EZ EST 60PC is a cement-free, 60% alumina castable that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation
Chemically Bonded Castables

EZ EST 60Z PCArrow icon

EZ EST 60Z PC is a colloidal silica-bonded, 60% alumina castable containing zircon that can be vibration cast, pumped, or shotcreted. This castable requires an additional liquid binder (EZ ADD binder) for mixing and installation. Water is NOT added for installation.
PDS SDS
EZ EST 60Z PC is a colloidal silica-bonded, 60% alumina castable containing zircon that can be vibration cast, pumped, or shotcreted. This castable requires an additional liquid binder (EZ ADD binder) for mixing and installation. Water is NOT added for installation.
Chemically Bonded Castables

EZ EST 60ZGArrow icon

EZ EST 60ZG is a colloidal-silica bonded gun mix. This product is engineered for short turnaround after placement. The colloidal silica binder must be added at the nozzle. This product also contains an additive to reduce dusting.
PDS SDS
EZ EST 60ZG is a colloidal-silica bonded gun mix. This product is engineered for short turnaround after placement. The colloidal silica binder must be added at the nozzle. This product also contains an additive to reduce dusting.
Chemically Bonded Castables

EZ EST 95PCArrow icon

Colloiodal Silca-bonded, Tabular Alumina Castable
PDS SDS
Colloiodal Silca-bonded, Tabular Alumina Castable
Conventional Castable

Hi Strength 25Arrow icon

HI-STRENGTH™ 25 is a very cost-effective, high duty refractory castable designed to resist abrasion and erosion at moderate temperatures. It has excellent thermal shock resistance and is widely used as a refractory lining and maintenance material for many different applications.
PDS SDS
HI-STRENGTH™ 25 is a very cost-effective, high duty refractory castable designed to resist abrasion and erosion at moderate temperatures. It has excellent thermal shock resistance and is widely used as a refractory lining and maintenance material for many different applications.
Conventional Castable

Hi Strength 26LIArrow icon

HI-STRENGTH™ 26-LI was developed to meet the demands for a low iron castable in the 125 Ibs/ft3 range. The lower iron content results in better resistance to reducing atmospheres. It has excellent strength throughout its temperature range and very good abrasion and erosion resistance.
PDS
HI-STRENGTH™ 26-LI was developed to meet the demands for a low iron castable in the 125 Ibs/ft3 range. The lower iron content results in better resistance to reducing atmospheres. It has excellent strength throughout its temperature range and very good abrasion and erosion resistance.
Conventional Castable

Hi Strength 28LIArrow icon

HI-STRENGTH™ 28-LI produces a tough, monolithic structure with negligible shrinkage. It has good refractoriness with a 2800°F use limit. A casting or ramming consistency may be obtained by control of water during mixing.
PDS SDS
HI-STRENGTH™ 28-LI produces a tough, monolithic structure with negligible shrinkage. It has good refractoriness with a 2800°F use limit. A casting or ramming consistency may be obtained by control of water during mixing.
Conventional Castable

HM 26 LIFArrow icon

HM 26 LIF is a Fine Grain, General Purpose Gunning Mix bonded with Low Iron Cement. HM 26 LIF can be used to repair and maintain Coke Oven Walls.
PDS SDS
HM 26 LIF is a Fine Grain, General Purpose Gunning Mix bonded with Low Iron Cement. HM 26 LIF can be used to repair and maintain Coke Oven Walls.
Conventional Castable

HM 28 LIArrow icon

HM 28 LI is a low iron refractory gunning mix based on hard fired alumina/silica aggregate of approximately 60 % mullite content and a low iron calcium aluminate binder.
PDS SDS
HM 28 LI is a low iron refractory gunning mix based on hard fired alumina/silica aggregate of approximately 60 % mullite content and a low iron calcium aluminate binder.
Low Cement Castable

Kricon 28Arrow icon

KRICON® 28 is a good general purpose, low iron, low cement castable for service temperatures up to 2800°F.
PDS SDS
KRICON® 28 is a good general purpose, low iron, low cement castable for service temperatures up to 2800°F.
Low Cement Castable

Kricon 30Arrow icon

KRICON® 30 is a low iron castable with good slag resistance up to 3000°F
PDS SDS
KRICON® 30 is a low iron castable with good slag resistance up to 3000°F
Low Cement Castable

Kricon 32Arrow icon

KRICON® 32 is designed for service temperatures up to 3200°F. It is a high alumina, low iron castable with excellent hot modulus of rupture strengths.
PDS SDS
KRICON® 32 is designed for service temperatures up to 3200°F. It is a high alumina, low iron castable with excellent hot modulus of rupture strengths.
Low Cement Castable

Kricon 32-70Arrow icon

KRICON® 32-70 is a 77% alumina, low iron castable with a 3200°F temperature limit. It offers improved slag resistance and positive reheat expansion at steel making temperatures to insure tight, crack-free linings in cast ladles and tundishes.
PDS SDS
KRICON® 32-70 is a 77% alumina, low iron castable with a 3200°F temperature limit. It offers improved slag resistance and positive reheat expansion at steel making temperatures to insure tight, crack-free linings in cast ladles and tundishes.
Low Cement Castable

Kricon 34Arrow icon

KRICON® 34 is designed for service temperatures up to 3400°F. It is an extra high alumina castable featuring low porosity and low permeability while maintaining good thermal shock resistance. This mix is very pure at 99% alumina with a very low content of total impurities.
PDS SDS
KRICON® 34 is designed for service temperatures up to 3400°F. It is an extra high alumina castable featuring low porosity and low permeability while maintaining good thermal shock resistance. This mix is very pure at 99% alumina with a very low content of total impurities.
Low Cement Castable

Quikturn 60GArrow icon

QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
PDS SDS
QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable

Quikturn 60G (UK)Arrow icon

QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
PDS SDS
QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable

Quikturn 60LQY PCArrow icon

An alkali-resistant 60% alumina castable that can be installed using vibration casting, pumping, or wet shotcreting methods. This product has been formulated to be resistant to alkali attack. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule.
PDS SDS
An alkali-resistant 60% alumina castable that can be installed using vibration casting, pumping, or wet shotcreting methods. This product has been formulated to be resistant to alkali attack. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule.
Low Cement Castable

Quikturn 60PCArrow icon

QUIKTURN 60PC is a mullite-based, low cement, 60% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
PDS SDS
QUIKTURN 60PC is a mullite-based, low cement, 60% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.