Ash Hopper Refractories - Resco Products

Ash Hopper

Selecting the right refractory lining for a wet-to-dry ash hopper can be difficult. When selecting the right refractory product for your ash hopper. Consider the severe abrasion conditions, falling slag into the hopper, mechanical abuse, and thermal shock (wet-bottom ash hoppers).

Resco Products representatives will evaluate your processes and plant conditions to recommend the most optimal products. Resco’s experts will determine the scope and construct the most efficient products and identify the best method for installation. Ensuring proper installation methods and materials have a lasting effect on the longevity of the refractory installed.

RELATED PRODUCTS
Plastic

CorlineArrow icon

CORLINE® was designed for linings exposed to extreme erosion environments in heat enclosures of the oil refining, petrochemical, gas processing and solid fuels processing industries. CORLINE® is a High Alumina, Chemically Bonded, Erosion Resistant Refractory.
CORLINE® was designed for linings exposed to extreme erosion environments in heat enclosures of the oil refining, petrochemical, gas processing and solid fuels processing industries. CORLINE® is a High Alumina, Chemically Bonded, Erosion Resistant Refractory.
CORPATCH® 80-MS is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
CORPATCH® 80-MS is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
Conventional Castable

EZ Cast 2800Arrow icon

EZ CAST® 2800 is similar to EZ CAST® 2700, except designed for applications up to 2800°F. In the laboratory, this product has tested well for resistance to CO (carbon monoxide) disintegration encountered in coke ovens and blast furnaces.
EZ CAST® 2800 is similar to EZ CAST® 2700, except designed for applications up to 2800°F. In the laboratory, this product has tested well for resistance to CO (carbon monoxide) disintegration encountered in coke ovens and blast furnaces.
Low Cement Castable

EZ Cubed 56SCPCArrow icon

EZ CUBED® 56SCPC is a Low Cement, Silicon Carbide-based castable. This product can be installed by vibration cast, pumping or shotcreting methods.
EZ CUBED® 56SCPC is a Low Cement, Silicon Carbide-based castable. This product can be installed by vibration cast, pumping or shotcreting methods.
Low Cement Castable

EZ Cubed Fine 80 SiCArrow icon

Fine grained/shotcretable/sic containing/low cement castable
Fine grained/shotcretable/sic containing/low cement castable
Low Cement Castable

EZ Cubed Fine 90 BFAArrow icon

Fine grained/shotcretable castable
Fine grained/shotcretable castable
Low Cement Castable

EZ Cubed FS-6PCArrow icon

EZ CUBED® FS-6PC is a Low Cement, Fused Silica-based castable that can be installed by casting methods. This castables features excellent resistance to thermal cycling and low thermal expansion.
EZ CUBED® FS-6PC is a Low Cement, Fused Silica-based castable that can be installed by casting methods. This castables features excellent resistance to thermal cycling and low thermal expansion.
Chemically Bonded Castables

EZ EST 10CRArrow icon

EZ EST 10CR is a cement-free, alumina-chrome castable with 10% chromic oxide, that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation.
EZ EST 10CR is a cement-free, alumina-chrome castable with 10% chromic oxide, that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation.
Chemically Bonded Castables

EZ EST 20CRArrow icon

EZ EST 20CR is a cement-free, alumina-chrome castable with 20% chromic oxide, that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation.
EZ EST 20CR is a cement-free, alumina-chrome castable with 20% chromic oxide, that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation.
Low Cement Castable

ProGun LC 50GArrow icon

ProGun LC 50G is a 3000oF low-cement gun mix. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths.
ProGun LC 50G is a 3000oF low-cement gun mix. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths.
Low Cement Castable

ProGun LC 70SCG (UK)Arrow icon

ProGun LC 70SCG is a SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance, non-wetting characteristics and high heat transfer of SiC make this product an excellent choice for riser lines and pre-heater sections in CEMENT PLANTS and in combustion zones in POWER GENERATION units exclusively. This tightly bonded SiC product greatly reduces (or eliminates) surface slagging and clinker/alkali build-up.
ProGun LC 70SCG is a SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance, non-wetting characteristics and high heat transfer of SiC make this product an excellent choice for riser lines and pre-heater sections in CEMENT PLANTS and in combustion zones in POWER GENERATION units exclusively. This tightly bonded SiC product greatly reduces (or eliminates) surface slagging and clinker/alkali build-up.
Low Cement Castable

ProGun LC 80SCGArrow icon

ProGun LC 80SCG is an 80% SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance and high heat transfer value make this product an excellent choice for the tube walls in the combustion zones of power generating units. The high heat transfer characteristic of the SiC reduces surface slagging and alkali build-up, thereby, improving the operating efficiency of your unit.
ProGun LC 80SCG is an 80% SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance and high heat transfer value make this product an excellent choice for the tube walls in the combustion zones of power generating units. The high heat transfer characteristic of the SiC reduces surface slagging and alkali build-up, thereby, improving the operating efficiency of your unit.
Low Cement Castable

ProGun LC FS-6Arrow icon

ProGun LC FS-6 is a low cement, fused silica gun mix that offers high strength, very good resistance to abrasion, and low reversible thermal expansion.
ProGun LC FS-6 is a low cement, fused silica gun mix that offers high strength, very good resistance to abrasion, and low reversible thermal expansion.
Plastic

Rescoram 10CRArrow icon

RESCORAM 10 CR is a high alumina, phosphate-bonded plastic with 10% chromic oxide that is used throughout the metals producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
RESCORAM 10 CR is a high alumina, phosphate-bonded plastic with 10% chromic oxide that is used throughout the metals producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic

Rescoram 20CRArrow icon

RESCORAM 20CR is a Phosphate-Bonded Alumina-Chrome Plastic that contains 20% chromic oxide, for increased slag and corrosion resistance.
RESCORAM 20CR is a Phosphate-Bonded Alumina-Chrome Plastic that contains 20% chromic oxide, for increased slag and corrosion resistance.
Plastic

Rescoram 70SCArrow icon

RESCORAM 70 SC is a 70% silicon carbide, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
RESCORAM 70 SC is a 70% silicon carbide, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic

Rescoram 7CRArrow icon

RESCORAM 7 CR is a high alumina, phosphate-bonded plastic with 7% chromic oxide that is used throughout the metals producing industries. RESCORAM 7 CR has a chemical bond that develops a high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
RESCORAM 7 CR is a high alumina, phosphate-bonded plastic with 7% chromic oxide that is used throughout the metals producing industries. RESCORAM 7 CR has a chemical bond that develops a high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.