Direct Reduced Iron DRI Refractories - Resco Products

Direct Reduced Iron (DRI)

Direct Reduced Iron (DRI) is an alternative to the blast furnace processes to produce a source of iron units. Greater availability of natural gas has replaced classic coke oven coal-based processes. Several processes are commercially viable today and they use a number of ways to achieve good quality DRI.

Refractories for DRI 

Direct Reduce Iron refractory products capable of withstanding the impact of exposure to these gases, thermal shock, and erosion associated with the abrasiveness of the material processing demand excellent products which Resco Products has to offer. Commonly used products are Krial 50CM, Krial CFB, and Rescal 90XDC.

RELATED PRODUCTS
Alumina Brick

Krial 50 CMArrow icon

KRIAL® 50 is a low alkali ladle brick that has provided outstanding service. It has excellent strengths, low porosity, and desirable expansion behavior. KRIAL® 50 continues to be an excellent choice for sidewalls and bottoms in milder ladle environments and for safety linings where more refractory linings are necessary.
PDS SDS
KRIAL® 50 is a low alkali ladle brick that has provided outstanding service. It has excellent strengths, low porosity, and desirable expansion behavior. KRIAL® 50 continues to be an excellent choice for sidewalls and bottoms in milder ladle environments and for safety linings where more refractory linings are necessary.
Alumina Brick

Krial CFBArrow icon

KRIAL® CFB is a low iron, high strength 70 % alumina brick designed for resistance to impact, abrasion, and carbon monoxide (CO) attack in severe wear blast furnace applications. It has low porosity and outstanding hot and cold strengths.
PDS SDS
KRIAL® CFB is a low iron, high strength 70 % alumina brick designed for resistance to impact, abrasion, and carbon monoxide (CO) attack in severe wear blast furnace applications. It has low porosity and outstanding hot and cold strengths.
Pre-Cast Shapes

Rescal 90 XD-CArrow icon

Burned, 90% alumina brick
PDS SDS
Burned, 90% alumina brick
Low Cement Castable

R-Max GArrow icon

R-MAX G is a 3200°F high performance gunning mix designed to provide maximum abrasion resistance and excellent strengths throughout all operating temperatures. R-Max G should be installed using conventional gunning methods.
PDS SDS
R-MAX G is a 3200°F high performance gunning mix designed to provide maximum abrasion resistance and excellent strengths throughout all operating temperatures. R-Max G should be installed using conventional gunning methods.
Low Cement Castable

R-Max G (ESC)Arrow icon

R-MAX G is a 3200 °F high performance gunning mix designed to provide maximum abrasion resistance and excellent strengths throughout all operating temperatures. RMax G should be installed using conventional gunning methods. The data shown are average test results following the guidelines set forth in ASTM C-903; “Preparing Refractory Concrete Specimens by Cold Gunning”.
PDS SDS
R-MAX G is a 3200 °F high performance gunning mix designed to provide maximum abrasion resistance and excellent strengths throughout all operating temperatures. RMax G should be installed using conventional gunning methods. The data shown are average test results following the guidelines set forth in ASTM C-903; “Preparing Refractory Concrete Specimens by Cold Gunning”.
Low Cement Castable

R-Max G (UK)Arrow icon

R-MAX G is a 3200°F high performance gunning mix designed to provide maximum abrasion resistance and excellent strengths throughout all operating temperatures. R-Max G should be installed using conventional gunning methods.
PDS SDS
R-MAX G is a 3200°F high performance gunning mix designed to provide maximum abrasion resistance and excellent strengths throughout all operating temperatures. R-Max G should be installed using conventional gunning methods.
Low Cement Castable

R-Max G QTArrow icon

R-MAX G QT is a high performance gunning mix designed to provide high abrasion resistance and excellent strengths. R-Max G QT should be installed using conventional gunning methods. After the final set, this unique gun mix can be heated without the traditional controlled heating schedule. Ideal applications for this product include areas of severe abrasion, where refractory heatup is difficult to control or a shorter heatup schedule is desired.
PDS SDS
R-MAX G QT is a high performance gunning mix designed to provide high abrasion resistance and excellent strengths. R-Max G QT should be installed using conventional gunning methods. After the final set, this unique gun mix can be heated without the traditional controlled heating schedule. Ideal applications for this product include areas of severe abrasion, where refractory heatup is difficult to control or a shorter heatup schedule is desired.
Pre-Cast Shapes

R-Max MP Fired ShapesArrow icon

Low cement-containing 85% alumina castable that has been formulated for casting shapes. This product features very high abrasion resistance and high strengths. This product should be installed by vibration casting methods only.
PDS SDS
Low cement-containing 85% alumina castable that has been formulated for casting shapes. This product features very high abrasion resistance and high strengths. This product should be installed by vibration casting methods only.