Torpedo Car Refractories - Resco Products

Torpedo Car

Torpedo Ladle Car and Refractory Products

Torpedo Cars, also known as hot metal cars, are utilized as iron transfer cars. They have a residence time of two to four hours or longer. More recently torpedo cars have been utilized for molten metal treatments such as de-sulfurization and de-siliconization. The torpedo car transfers molten iron (pig iron) from the blast furnace to the steelmaking facility.

Both processes require refractories to withstand high temperatures and a greater number of chemical reactions. Resulting in a greater impact on the refractory present.

Common Resco products utilized in a torpedo car consists of Krial CFB, Rescal 70D, and Seneca 60P. Our experts will ensure you're getting the right refractory products for your torpedo car.


Torpedo Ladle Car    Products for Torpedo Cars 
 Safety Lining Castables 
 Rescoram A-45 HC
 Working Lining Brick  Mortars 
 Resin Bonded Alumina Burned Alumina  Rescoset 80P 
 Ladlemax BSC Krial CFB  Adacor 70 
   Resco 70D Adacor 80 
 Working Lining and/or Maintenance  Shotcrete
 Vibrocast 60 PC QuikTurn 60PC  EZ Cubed 70 PC 


LadleMax BSC - a resin-bonded alumina carbon brick with silicon carbide designed for use in hot metal cars or iron charging ladles. This bauxite-based, iron friendly brick is typically used in low wear areas. 

Krial CFB - a low iron, high strength 70% alumina brick designed for resistance to impact, abrasion, and carbon monoxide (CO) attack in severe blast furnace and DRI applications. 

Rescal 70D- this general-purpose, bauxite-based 70% alumina brick features an extraordinary degree of corrosion and thermal shock resistance. It is ideally suited when cost-effectiveness is essential. These brick are also used to line iron charging ladles

Vibrocast 60PC - a 60% alumina, mullite-based shotcrete mix designed for minimum porosity and low linear change with maximum density and high fired strengths. This material will withstand severe high-temperature corrosion and erosion environments.

Quikturn 60PC - a 60% alumina, mullite-based shotcrete material. After the initial set, the hot metal car can be returned to operation without curing or the traditional controlled heating schedule.

EZ Cubed 70PC - a 70% alumina shotcrete mix designed to give improved erosion, corrosion, and refractoriness over Vibrocast 60PC. 

RELATED PRODUCTS
Wet Mortar

Adacor 70 DipArrow icon

ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 70 TR-D3.5Arrow icon

ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 80 DipArrow icon

ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 80 TR-D3.5Arrow icon

ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Dry Mortar

Adamant Air Set-DryArrow icon

A dry, air-setting fireclay - silica based mortar, with a maximum service temperature of 3000°F, used for bonding super duty brick. Just add water to obtain the desired trowel or dipping consistency. This product will take an air set, but does not develop its full joint strength until after heating to 220°F (105°C)
A dry, air-setting fireclay - silica based mortar, with a maximum service temperature of 3000°F, used for bonding super duty brick. Just add water to obtain the desired trowel or dipping consistency. This product will take an air set, but does not develop its full joint strength until after heating to 220°F (105°C)
Wet Mortar

Adamant X GreenArrow icon

ADAMANT X is a fireclay-silica based material with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time. ADAMANT X is the original wet air setting cement for bonding intermediate, high heat and super duty fireclay brick. Produced since 1907, ADAMANT X was one of the first bonding mortars introduced to industry that truly bonded brick together. Through the years, the ADAMANT X trademark has stood for quality and has been widely accepted by refractory consumers.
ADAMANT X is a fireclay-silica based material with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time. ADAMANT X is the original wet air setting cement for bonding intermediate, high heat and super duty fireclay brick. Produced since 1907, ADAMANT X was one of the first bonding mortars introduced to industry that truly bonded brick together. Through the years, the ADAMANT X trademark has stood for quality and has been widely accepted by refractory consumers.
Wet Mortar

Adamant X YellowArrow icon

ADAMANT X is a fireclay-silica based material with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time. ADAMANT X is the original wet air setting cement for bonding intermediate, high heat and super duty fireclay brick. Produced since 1907, ADAMANT X was one of the first bonding mortars introduced to industry that truly bonded brick together. Through the years, the ADAMANT X trademark has stood for quality and has been widely accepted by refractory consumers.
ADAMANT X is a fireclay-silica based material with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time. ADAMANT X is the original wet air setting cement for bonding intermediate, high heat and super duty fireclay brick. Produced since 1907, ADAMANT X was one of the first bonding mortars introduced to industry that truly bonded brick together. Through the years, the ADAMANT X trademark has stood for quality and has been widely accepted by refractory consumers.
Wet Mortar

Adaphos 85 DipArrow icon

ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
Wet Mortar

Adaphos 85 TR-D3Arrow icon

ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
Low Cement Castable

EZ Cubed 70PCArrow icon

EZ CUBED® 70PC is a Low Cement, 70% Alumina castable that can be installed by vibration cast, pumping or shotcreting methods.
EZ CUBED® 70PC is a Low Cement, 70% Alumina castable that can be installed by vibration cast, pumping or shotcreting methods.
Alumina Brick

Krial CFBArrow icon

KRIAL® CFB is a low iron, high strength 70 % alumina brick designed for resistance to impact, abrasion, and carbon monoxide (CO) attack in severe wear blast furnace applications. It has low porosity and outstanding hot and cold strengths.
KRIAL® CFB is a low iron, high strength 70 % alumina brick designed for resistance to impact, abrasion, and carbon monoxide (CO) attack in severe wear blast furnace applications. It has low porosity and outstanding hot and cold strengths.
Alumina Brick

LadleMax BSCArrow icon

Resin bonded, alumina-carbon-silicon carbide brick
Resin bonded, alumina-carbon-silicon carbide brick
Low Cement Castable

Quikturn 60PCArrow icon

QUIKTURN 60PC is a mullite-based, low cement, 60% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
QUIKTURN 60PC is a mullite-based, low cement, 60% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Wet Mortar

Rescoset 80P TR-D3Arrow icon

Rescoset 80P is a wet high alumina bonding mortar with improved shelf life. With the unique chemical bonding system, high bonding strength is developed at lower temperatures (300-600°F) and continues until a ceramic bonding occurs. Rescoset 80P is primarily used to lay up high alumina brick and is available in troweling and dipping consistency. It is used in areas where severe service conditions require increased refractoriness and corrosion/erosion resistance.
Rescoset 80P is a wet high alumina bonding mortar with improved shelf life. With the unique chemical bonding system, high bonding strength is developed at lower temperatures (300-600°F) and continues until a ceramic bonding occurs. Rescoset 80P is primarily used to lay up high alumina brick and is available in troweling and dipping consistency. It is used in areas where severe service conditions require increased refractoriness and corrosion/erosion resistance.
Alumina Brick

Seneca 60 PArrow icon

Burned, high alumina brick
Burned, high alumina brick
Alumina Brick

Seneca 80Arrow icon

High alumina brick
High alumina brick
Low Cement Castable

Vibrocast 60PCArrow icon

VIBROCAST 60PC is a Pumpable, Low Cement, 60% Alumina castable based on a mullite aggregate, that can be installed by vibration cast, pumping, and shotcreting methods.
VIBROCAST 60PC is a Pumpable, Low Cement, 60% Alumina castable based on a mullite aggregate, that can be installed by vibration cast, pumping, and shotcreting methods.