Product Category
Product Group
Installation Methods
Maximum Service Temperature F
Maximum Service Temperature C
Key Ingredients
Chemistry
Location
Refractory Products
Pre-Cast Shapes
Fondu Panel Mix

FONDU PANEL MIX is used to produce lightweight, strong, perlite based panels. They can be manufactured to a wide range of sizes to fit special industrial needs.
Pre-Cast Shapes
Gas Panel Mix

GAS PANEL MIX is used to produce lightweight, strong panels. They can be manufactured to a wide range of sizes to fit special industrial needs.
Pre-Cast Shapes
Glass Panel Mix

GLASS PANEL MIX is used to produce lightweight, strong, vermiculite panels. They can be manufactured to a wide range of sizes to fit special industrial needs.
Pre-Cast Shapes
Mighty Agg 98

Mighty Agg 98 is a silica free high purity alumina, low cement castable designed for maximum resistance to thermal shock and abrasion. This mix is only sold in precast shapes.
Pre-Cast Shapes
Mighty Fibre M-HCA

MIGHTY FIBRE M is a precast shape made with a castable-bonded, metallic fiber composite for added strength and spalling resistance. MIGHTY FIBRE M precast shapes can be used in applications where mechanical abuse and thermal cycling are normal operating conditions.
Pre-Cast Shapes
Rescocast 3A Panel Mix

RESCOCAST 3A is a lightweight, low iron, insulating panel mix which has a service limit temperature of 2500oF. It is used primarily where reducing atmospheres may be present.
Pre-Cast Shapes
R-Max MP Fired Shapes

Low cement-containing 85% alumina castable that has been formulated for casting shapes. This product features very high abrasion resistance and high strengths. This product should be installed by vibration casting methods only.
Pre-Cast Shapes
Unicrete 80LC SC15

UNICRETE 80 LC SC15 is a low cement, 80% alumina castable with a 15% silicon carbide addition. This castable is installed by vibration cast methods
Pre-Cast Shapes
Unicrete 98LCXC

UNICRETE 98 LCXC is a silica-free, low cement, high purity alumina castable. This castable can be used in high temperature applications and where a silica-free, high purity alumina castable is applicable. UNICRETE 98 LCXC is installed by vibration casting methods only.
Pre-Cast Shapes
Uniform 28LI

Uniform 28 LI is a precast shape made with a low iron casting mix based on high fired alumina/silica aggregate of approximately 60% mullite content, bonded with low iron calcium aluminate cement. Uniform 28 LI shapes can be used in coke oven, blast furnace and other applications where reducing conditions occur.
Uniform 28 LI is a precast shape made with a low iron casting mix based on high fired alumina/silica aggregate of approximately 60% mullite content, bonded with low iron calcium aluminate cement. Uniform 28 LI shapes can be used in coke oven, blast furnace and other applications where reducing conditions occur.
Pre-Cast Shapes
Uniform 50M Coarse

Uniform 50M COARSE is a precast shape made with a coarse grain, low cement castable
Pre-Cast Shapes
Uniform 60LCXC QF SC15 2%406

A coarse grain,low cement, 60% alumina precast mix that contains a silicon carbide addition, for improved penetration resistance. The product features good strength and dimensional stability.This precast mix is available with stainless steel fibers for improved cohesion, strength, and spall resistance.
A coarse grain,low cement, 60% alumina precast mix that contains a silicon carbide addition, for improved penetration resistance. The product features good strength and dimensional stability.This precast mix is available with stainless steel fibers for improved cohesion, strength, and spall resistance.
Pre-Cast Shapes
Uniform 60M

UNIFORM 60M is a Precast Shape made with a 60% Alumina low cement castable
Pre-Cast Shapes
Uniform 60M Coarse

Uniform 60M COARSE is a precast shape made with a coarse grain, low cement castable
Pre-Cast Shapes
Uniform 65LC

UNIFORM 65 LC is a precast shape made with a high strength, low moisture castable based on hard fired alumina/silica aggregate. UNIFORM 65 LC is designed for maximum resistance to abrasion and erosion.
Pre-Cast Shapes
Uniform 67CLC

Uniform 67 CLC is a precast shape utilizing a high alumina low cement castable designed for maximum resistance to thermal shock and abrasion.
Pre-Cast Shapes
Uniform 70 UCXC

UNIFORM 70 UCXC is a coarse grain-containing, ultralow cement, 70% alumina precast shape. This precast mix features excellent dimensional stability, strength, and corrosion resistance and is available with stainless steel fibers for additional strength and spall resistance.
Pre-Cast Shapes
Uniform 70LC

UNIFORM 70 LC is a precast shape made with an 70% Alumina, Low Cement Castable. For added strength and spalling resistance, UNIFORM 70 LC is available with stainless steel fiber additions.