Transfer Lines

22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.

22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.

Rescobond AA-22S is a chemically bonded, erosion resistant, single component refractory material used primarily in thin lining applications to protect against severe abrasion. To prepare for use, blend Rescobond AA-22S with water. Rescobond AA-22S is an air setting material. It can also be used to patch other refractory linings.

Rescobond AA-22S is a chemically bonded, erosion resistant, single component refractory material used primarily in thin lining applications to protect against severe abrasion. To prepare for use, blend Rescobond AA-22S with water. Rescobond AA-22S is an air setting material. It can also be used to patch other refractory linings.

<table border="0" cellspacing="0" cellpadding="0" class="" style="width: 100%"> <colgroup><col></colgroup> <tbody> <tr> <td> <p>Rescobond BRUSH MIX DRY is a dry material that when mixed with water is ideal for strengthening existing refractory lining surfaces. It can be applied up to ¼” thick providing increased refractory protection without a great loss of volume to your unit. Additional water can be added to adjust the consistency. It can be applied with a brush, trowel, rubber float, roller, sprayer, etc. It hardens in air and becomes non-hydroscopic when heated to only 250 - 300°F.</p> <div><br> </div> </td> </tr> </tbody> </table> <br>

Rescobond MAAX, like Rescobond AA-22S, is a chemically bonded, erosion resistant, single component refractory material used primarily in thin lining applications to protect against severe abrasion. To prepare for use, blend Rescobond MAAX with water. Rescobond MAAX is an air setting material, and it utilizes the same binder system as Rescobond AA-22S. It can also be used to patch other refractory linings. Rescobond MAAX is an upgraded version of Rescobond AA-22S.

RESCOCAST 110EZ is a casting grade refractory that combines strength and abrasion resistant qualities with low thermal conductivity. RESCOCAST 110EZ can be installed using vibration casting methods or as a self flowing material that requires minimal vibration. It is the product of choice when performance and insulation is desired in a single product. RESCOCAST 110EZ cannot be pumped.

RESCOCAST 110C is a vibratrion casting grade refractory that combines strength and abrasion resistant qualities with low thermal conductivity. RESCOCAST 110C is the product of choice when both performance and insulation is desired in a single product.

RESCOCAST 110C is a vibratrion casting grade refractory that combines strength and abrasion resistant qualities with low thermal conductivity. RESCOCAST 110C is the product of choice when both performance and insulation is desired in a single product.

RESCOCAST 110G is a unique gunning grade refractory that has been formulated to have high strength and abrasion resistance with relatively low thermal conductivity. RESCOCAST 110G is the gun mix of choice when high performance and insulating value are desired in a single gun mix. Data shown below are average results of property tests, following the guidelines stated in ASTM C-903 Method; "Preparing Refractory Concrete Specimens by Cold Gunning".

RESCOCAST 110G is a unique gunning grade refractory that has been formulated to have high strength and abrasion resistance with relatively low thermal conductivity. RESCOCAST 110G is the gun mix of choice when high performance and insulating value are desired in a single gun mix. Data shown below are average results of property tests, following the guidelines stated in ASTM C-903 Method; "Preparing Refractory Concrete Specimens by Cold Gunning".

RESCOCAST 110G QT is a unique gunning grade refractory that is formulated to have high strength and abrasion resistance with relatively low thermal conductivity. RESCOCAST 110G QT is the gun mix of choice when high performance and insulating value are desired in a single gun mix. After the initial set,this unique insulating castable can be heated without the traditional ramp-and-hold heating schedule.

A high strength, medium weight insulating castable formulated primarily for pumpcasting.

RESCOCAST 17EC is a casting grade refractory that has been vibrated in U-Bends, YSections, overhead lines, and other catalyst transfer lines throughout the world. Extended working time and ease of placement with vibration has made RESCOCAST 17EC the "Specified" material. Resco Quality Control monitors erosion testing results, thus guaranteeing a product that meets severe petrochemical service conditions.

RESCOCAST 17EC is a casting grade refractory that has been vibrated in U-Bends, YSections, overhead lines, and other catalyst transfer lines throughout the world. Extended working time and ease of placement with vibration has made RESCOCAST 17EC the "Specified" material. Resco Quality Control monitors erosion testing results, thus guaranteeing a product that meets severe petrochemical service conditions.

RESCOCAST 17EG is an erosion resistant gunning mix refractory that has been formulated to have improved gunning characteristics and excellent physical properties. Data shown below are average results of tests following the guidelines set forth in ASTM C-903 "Preparing Refractory Concrete Specimens by Cold Gunning".

RESCOCAST 17EG is an erosion resistant gunning mix refractory that has been formulated to have improved gunning characteristics and excellent physical properties. Data shown below are average results of tests following the guidelines set forth in ASTM C-903 "Preparing Refractory Concrete Specimens by Cold Gunning".

RESCOCAST 17EMC is a thermal shock resistant castable with low thermal conductivity and moderate abrasion resistance. This product should be installed using vibration casting methods.

RESCOCAST 17EMC is a thermal shock resistant castable with low thermal conductivity and moderate abrasion resistance. This product should be installed using vibration casting methods.

RESCOCAST 17EMG gunning grade refractory is for gunite applications only and has a quick set time once water is added at the nozzle. It is less sensitive to lower installation temperatures and can usually be applied directly to the wall without “aging”. Lower thermal conductivity, higher resistance to thermal spalling and erosion are some of the unique properties of this patented system of raw materials. Data shown are average results of tests following the guidelines set forth in ASTM C-903 “Preparing Refractory Concrete Specimens by Cold Gunning”.

RESCOCAST 17EMG gunning grade refractory is for gunite applications only and has a quick set time once water is added at the nozzle. It is less sensitive to lower installation temperatures and can usually be applied directly to the wall without “aging”. Lower thermal conductivity, higher resistance to thermal spalling and erosion are some of the unique properties of this patented system of raw materials. Data shown are average results of tests following the guidelines set forth in ASTM C-903 “Preparing Refractory Concrete Specimens by Cold Gunning”.

RESCOCAST 17EPC is the pumpable version of Rescocast 17EC. This pumpable product can be installed in many refinery applcations that currently use Rescocast 17EC, such as riser lines, overhead lines, Y-sections, U-bends, and other catalyst transfer lines in petrochemical refineries

RESCOCAST 88VC is a Abrasion-Resistant, High Strength Castable formulated for cast applications in oil refineries . This castable should be installed by vibration casting only.

R-Max MP is a high performance castable designed to provide maximum abrasion resistance and superior ease of installation. The product's zero-slump and soft "easy to install" texture results in high handpack installation rates.

R-Max MP is a high performance castable designed to provide maximum abrasion resistance and superior ease of installation. The product's zero-slump and soft "easy to install" texture results in high handpack installation rates.

SUREFLOW 110 is a free flowing refractory that combines strength and abrasion resistant qualities with low thermal conductivity. SUREFLOW 110 is the product of choice when both performance and insulation is desired in a single product. This product should be installed by pouring; no vibration is needed during installation. SUREFLOW 110 cannot be pumpcast.

SUREFLOW 17E is a high cement, self leveling castable that offers high strength and excellent resistance to abrasion. It has the same physical properties as Rescocast 17EC with the added advantage of flowing into place without heavy vibration. This product should be installed by pouring; no vibration is needed during installation. SUREFLOW 17E cannot be pumpcast.

SUREFLOW 17E is a high cement, self leveling castable that offers high strength and excellent resistance to abrasion. It has the same physical properties as Rescocast 17EC with the added advantage of flowing into place without heavy vibration. This product should be installed by pouring; no vibration is needed during installation. SUREFLOW 17E cannot be pumpcast.

SUREFLOW 88 is a high cement, self-leveling castable that offers high strength and excellent resistance to abrasion. This product should be installed by pouring; no vibration is needed during installation. It should be noted that SUREFLOW 88 is not recommended for pumpcasting.